manualshive.com logo in svg

Hyundai 2003 Santa Fe, Руководство пользователя

Hyundai Santa Fe 2003 - руководство владельца, доступное для скачивания совершенно бесплатно на manualshive.com. Получите необходимое руководство в формате PDF для вашего автомобиля, чтобы быть в курсе всех технических характеристик и возможностей вашего Hyundai Santa Fe 2003.

Поделиться
Скачать
background image

DRIVING YOUR HYUNDAI

   2- 19

C170A01A-AAT

HIGHER SPEED MOTORING
Pre-Trip Inspections

1. Tires:
Adjust the tire inflation pressures to specifica-
tion. Low tire inflation pressures will result in
overheating and possible failure of the tires.
Avoid using worn or damaged tires which may
result in reduced traction or tire failure.

NOTE:

Never exceed the maximum tire inflation
pressure shown on the tires.

2. Fuel, engine coolant and engine oil:
High speed travel consumes 1.5 times more
fuel than urban motoring. Do not forget to check
both engine coolant and engine oil.

3. Drive belt:
A loose or damaged drive belt may result in
overheating of the engine.

C160K01A-AAT

Carry Emergency Equipment

Depending on the severity of the weather where
you drive your car, you should carry appropri-
ate emergency equipment. Some of the items
you may want to carry include tire chains, tow
straps or chains, flashlight, emergency flares,
sand, a shovel, jumper cables, a window scraper,
gloves, ground cloth, coveralls, a blanket, etc.

!

C180A01A-AAT

USE OF LIGHTS

Check your lights regularly for correct opera-
tion and always keep them clean. When driving
during the day in conditions of poor visibility, it
is helpful to drive with headlights on low beam.
This enables you to be seen as well as to see.

C190A01S-AAT

TRAILER OR VEHICLE TOWING

If you are considering towing with your car, you
should first check with your State's Department
of Motor Vehicles to determine their legal re-
quirements.
Since laws vary from State to State the require-
ments for towing trailers, cars, or other types of
vehicles or apparatus may differ. Ask your
Hyundai dealer for further details before towing.

C190B01S-AAT

Trailer Hitches

Select the proper hitch and ball combination,
making sure that its location is compatible with
that of the trailer or vehicle being towed.
Use a quality non-equalizing hitch which distrib-
utes the tongue load uniformly throughout the
chassis.

The hitch should be bolted securely to the car
and installed by a qualified technician. DO NOT
USE A HITCH DESIGNED FOR TEMPORARY
INSTALLATION AND NEVER USE ONE THAT
ATTACHES ONLY TO THE BUMPER.

CAUTION:

Do not do any towing with your car during
its first 1,200 miles (2,000 km) in order to
allow the engine to properly break in. Fail-
ure to heed this caution may result in seri-
ous engine or transaxle damage.

C190C01Y-AAT

Trailer Brakes

If your trailer is equipped with a braking system,
make sure it conforms to federal and/or local
regulations and that it is properly installed and
operating correctly.

NOTE:

If you tow a trailer or vehicle, your car will
require more frequent maintenance due to
the additional load. See Maintenance Under
Severe Usage Conditions" on page 5-6.

Содержание 2003 Santa Fe






























































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для 2003 Santa Fe

Calira 811 Manual preview
811
Бренд: Calira Страницы: 14
Cadillac 2011 CTS COUPE Personalization Manual preview
2011 CTS COUPE
Бренд: Cadillac Страницы: 20
Cadillac 2011 CTS COUPE Specifications preview
2011 CTS COUPE
Бренд: Cadillac Страницы: 2
Cadillac 2009 CTS Owner'S Manual preview
2009 CTS
Бренд: Cadillac Страницы: 494
Cadillac 2008 Escalade Owner'S Manual preview
2008 Escalade
Бренд: Cadillac Страницы: 500
Cadillac 2006 Escalade Warranty And Owner Assistance Information preview
2006 Escalade
Бренд: Cadillac Страницы: 40
Cadillac 2004 DeVille Owner'S Manual preview
2004 DeVille
Бренд: Cadillac Страницы: 432
Cadillac 1997 Catera Owner'S Manual preview
1997 Catera
Бренд: Cadillac Страницы: 338
Cadillac 2009 STS Get To Know preview
2009 STS
Бренд: Cadillac Страницы: 20
Cadillac 2005 STS Owner'S Manual preview
2005 STS
Бренд: Cadillac Страницы: 438
Cadillac SRX 2012 Instructions preview
SRX 2012
Бренд: Cadillac Страницы: 3
Cadillac Escalade 2021 Features Manual preview
Escalade 2021
Бренд: Cadillac Страницы: 12
Cadillac CTS 2008 Navigation System Owner'S Manual preview
CTS 2008
Бренд: Cadillac Страницы: 106
Cadillac CTS 2008 Customer Convenience/Personalization Manual preview
CTS 2008
Бренд: Cadillac Страницы: 20
Cadillac ATS 2014 Convenience/Personalization Manual preview
ATS 2014
Бренд: Cadillac Страницы: 20
Cadillac ATS 2013 Owner'S Manual preview
ATS 2013
Бренд: Cadillac Страницы: 326
Cadillac CTS 2012 Quick Manual preview
CTS 2012
Бренд: Cadillac Страницы: 28
Cadillac ESCALADE - BROCHURE 2009 Owner'S Manual preview
ESCALADE - BROCHURE 2009
Бренд: Cadillac Страницы: 602

Бренды по названию

Популярные бренды

Загрузить еще бренды