Hyundai power products HYVI10030, Инструкция по эксплуатации

Страница: 5 / 8

5
INDUSTRIAL WET/DRY VACUUM
CLEANER
HYVI10030
WARNING
Read all safety warnings and all instructions.
Failure to
follow the warnings and instructions may result in electric
shock, fire and/or serious injury.
Save all warnings and
instructions for future reference.
SAFETY WARNINGS
When using the machine, always observe the enclosed safety
warnings as well as the additional safety warnings.
The following symbols are used throughout this manual:
Denotes risk of personal injury or damage to the machine.
SAFETY INSTRUCTIONS FOR WET/DRY VACUUM
CLEANERS
• Use original accessories only.
• When picking up liquids, only use the accessories intended for
this purpose.
• Do not pick up substances which adhere to the filter, such as
lime, powder, Gesso and graphite powder. The dust can block
the ventilation and damage the engine.
• Do not use the machine to pick up burning or smouldering
debris, explosive or inflammablesubstances and liquids.
• Do not allow the machine to tip over, as this may cause water to
enter the engine and damage it.
• Switch the machine off and remove the plug from the socket
after use.
• Keep the machine away from bright sunlight and high
temperatures.
• Keep body parts away from the vacuum opening when the
machine is running.
ELECTRICAL SAFETY
Always check that the power supply corresponds to the
voltage on the rating plate.
DESCRIPTION (FIG. A)
Your wet/dry vacuum cleaner has been designed for picking up dry
dust and debris as well as liquids.
1. On/off switch motor 1
2. On/off switch motor 2
3. On/off switch motor 3
4. Motor housing
5. Hose connection
6. Container
7. Container latch
8. Hose
9. Telescopic tube
10. Nozzle
11. Wheels
12. Trolley
Package contents
The package contains the following parts:
Wet/dry vacuum cleaner
Trolley
Hose
Telescopic tube
Dry floor brush
Wet floor brush
Crevice nozzle
Brush nozzle
HEPA Filter
Dustbag
MOUNTING THE TROLLEY (FIG B)
MOUNTING THE ACCESSORIES (FIG. A)
Before mounting an accessory, always unplug the
machine.
Connecting the hose (fig. A)
• Insert the end of the hose into the hose connection until it clicks
into place.
• Place the suction tube (9) on the other end of the hose.
• Place a mouthpiece on the other end of the tube.
• Switch on the machine.
Mounting accessories for picking up dry material (fig. A)
The dustbag must be used for picking up dry material.
• Remove the motor housing (3) from the container (7) by
releasing the container latches (8).
• Remove the intake filter by sliding it off the float.
• Place the dustbag in the container and slide it firmly over the
hose connection (9).
• Replace the motor housing and click the container latches firmly
shut.
• Connect the hose (10) to the hose connection (9).
NOTE: In order to ensure proper filtering when vacuuming dust
and dry material the intake filter needs removing and the
dustbag needs to be put in its place. The intake filter is only to
be used vacuuming liquids.
Mounting accessories for picking up liquids (fig. A)
The intake filter must be used for picking up liquids.
• Remove the motor housing (3) from the container (7) by
releasing the container latches (8).
• Slide the intake filter over the float.
• Remove the dustbag from the container.
• Replace the motor housing and click the container latches firmly
shut.
• Connect the hose to the hose connection.
NOTE: Remove all dirt and debris from the tank. A intake filter
must be used to vacuum up wet debris. Unplug the power cord
from the wall outlet before removing the motor assembly from
the tank. Turn the motor over.
Remove the dust collection bag and install the intake filter.
Blower function
Connect the hose to the hose connection on the backside to switch
from blowing to blowing.
Always switch off the piston when changing function.