www.hyundaipowerproducts.co.uk
16
In The Box
A
B
C
D
F
G
H
I
J
K
O
Cable Clips
These keep the cable secure and
tight to the machine.
4 x Wing Nuts
These secure the bars together.
You can loosen them to fold the
handlebar down for storage.
4 x Bolts
These secure the bars together.
Upper Bar
This connects to the middle bar.
2 x Bolts To Attach Wheel Axle To
Machine
These secure the wheel axle onto
the lower bars.
2 x Spacers
These slot onto the bolts
(O)
.
2 x Washers
These are part of attaching the
wheel axle onto the lower bars.
2 x Nuts
Use these to secure the wheel
axle onto the lower bars.
1 x Washer
This is part of attaching the wheel
axle to the right-hand lower bar
(if stood behind the handlebars).
Wheel Height Adjuster Pin
Use this pin to select a position for
the wheels (transport positon or
working position).
E
L
M
N
P
Q
R
S
Main Unit
This is the main part of the
machine.
Lower Bars
The lowers bars connect to the
main unit.
Handle Bars
You must hold these with both
hands when in use.
Middle Bar
The middle bar connects to the
lowers bars.
Tine Blades
2 x Wheels
These attach onto the wheel axle.
2 x Wheel Covers
These slot onto the wheels after
you have attached them onto the
wheel axle
.
Wheel Axle
Assemble the wheels onto this.
Wheel Axle Bracket
This attaches to the lower bars.
There is a wheel height adjuster
pin which allows you to choose
from two positions. You can
choose from the working position
(the wheels are up from the
ground and the transport position
(the wheels are on the ground).
2 x Washers For The Wheels
These are part of the wheel
assembly.
2 x Split Pins
These are part of the wheel
assembly.
W
H1
