Hyundai power products HYT1050E, Инструкция по эксплуатации, Страница: 7 / 40

www.hyundaipowerproducts.co.uk
7
Safety Information
During Use
• Do not operate the machine in confined areas where there may be a risk of
crushing the operator between the machine and another object.
• Never attempt to make any adjustments, while the machine is running.
• You must switch off the machine:
- Before checking or working on the machine.
- When transporting the machine.
- Whenever you leave the machine unattended.
- If the machine starts to vibrate abnormally.
• WARNING! If something breaks or an accident happens whilst working, you must
turn off the machine immediately and move the machine away to prevent further
damage. If an accident happens with injuries or third parties are injured, carry out
the first aid measures most suitable for the situation immediately and contact the
medical authorities for any necessary health care. Carefully remove any debris
that might cause damage or harm persons or animals should it not be seen.
• After striking a foreign object, stop the machine immediately and inspect the
machine thoroughly for damage. Repair the damage before continuing.
• Keep extension cord away from cutting elements.
• Never operate the machine with damaged guards or without the guard in
place.
• Keep hands and feet away from the cutting means at all times especially when
switching on the motor.
• Take care against injury from the blade fitted for trimming the filament line
length. After extending new cutter line, always return the trimmer to its normal
operating position before switching on.
• Never operate the machine without the defective guards or shields, or without
safety devices, or if the cord is damaged or worn.
• Be cautious when pulling the machine towards you.
• Do not use the tiller on slopes more than 15 °. Always work along the slope and
not up and down it. Always maintain a solid footing.
• Only remove dirt and plants from the machine once the machine has been
unplugged and stopped rotating.
• Always guide the tiller at walking pace with both hands on the handle.
• Always keep your hands and feet away from the rotating parts. There is danger
of serious injury.
• If the tiller vibrates or emits unusual noises when switched on, disconnect the
plug from the socket and do not use.
• Do not tilt the machine when starting.
• Make sure you always remain a safe distance away from the tine blades.
• Move the tiller to the work area before starting the motor.
• Switch the motor off before moving the tiller from one area to another. Wait for
the moving parts to come to a complete stop. Do not let the tines touch the
ground whilst you are moving the tiller, this could damage the machine.
• Never pass the Tiller over the extension cord. Make sure the cord is always in a
safe position behind you.
!