17
5.11
Once the engine has warmed up, move the throttle lever to the left to accelerate
the engine to the desired working speed.
CAUTION
You
MUST
allow the cutting head to come to a complete stop and switch the
engine
OFF
before carrying out any maintenance on the machine.
6.0
Before stopping the machine, allow the engine to cool down by moving the throttle
lever to the
SLOW
position and allowing the engine to idle under no load for 30
seconds.
6.1
Turn the power switch to the
OFF
position.
6.2
Turn the fuel tap left, to the
OFF
position.
6. STOPPING PROCEDURE
Throttle Lever in FAST
(left) Position
Fuel Tap
On
Choke in RUN
(right) Position
Throttle Lever in SLOW
(right) Position
Choke in RUN
(right) Position
Fuel Tap
OFF
