Hyundai power products HSS20V, Оригинальное руководство пользователя

Страница: 10 / 13

１０
c. INSTALLING JIGSAW BLADES
Selecting the correct type of blade is important in order to obtain the best performance
from the saw. Select the blade based on the application and on the material you wish to
cut. Selecting the right blade will give you a smoother, faster cut and prolong the life of the
blade.
Note: Before attaching a blade please ensure that the battery is not connected to the
jigsaw.
To fit the blade, push the quick change blade clamp lever until it stops, Fig 3.
Holding the blade clamp lever in the open position, insert the saw blade as far as possible
into the slot in the saw bar, Fig 4.
Check to make sure the back of the saw blade is centered in the groove of the roller guide.
Release the blade clamp lever. Make sure the blade is securely in place.
Note: During use periodically check the security of the blade.
d. INSTALLING THE BATTERY PACK
Warning! Always remove battery pack from your tool when you are assembling parts,
making adjustments, cleaning, carrying, transporting or when not in use. Removing battery
pack will prevent accidental starting that could cause serious personal injury.
NOTE: To avoid serious personal injury, always remove the battery pack and keep hands
clear of the lock-out button when carrying or transporting the tool.
Slice the battery pack into the tool base, Fig.5. (Note the battery has raised ribs which
allow it to fit into the pole saw only one way). Make sure the battery pack snaps into place
and that battery pack is secured in the tool before beginning operation. Improper
installation of the battery pack can cause damage to internal components.
e. REMOVING THE BATTERY PACK
Locate the battery release catch on the top of the battery and press downwards, Fig.6.
Whilst holding down the battery release catch slide the battery pack away from the tool.
f. TURNING THE JIGSAW ON & OFF
To turn the jigsaw ON, depress the lock-off safety button, Fig 7 and then depress the
On/Off switch, Fig 8.
Release the On/Off switch to turn the jigsaw OFF.
g. VARIABLE SPEED CONTROL
Simply apply light pressure to the trigger to start the jigsaw on a slow speed. Increasing
the pressure on the trigger will increase the speed of the jigsaw.
Note: You might hear a high pitched noise from the trigger during use. Do not be
concerned; this is a normal part of the trigger function.
h. LED WORK LIGHT
Caution: Do not look in the light or see the source of light directly.
Pull the On/Off trigger to light up the lamp. The lamp keeps on lighting while the switch
trigger is being pulled. The lamp goes out immediately after releasing the trigger.