Hytera TETRA PT560H F4, Руководство пользователя

Страница: 12 / 26

Step 3 Replace the cover and tighten the screw as shown in the figure below.
3.4
Attaching the Belt Clip
Step 1 Remove the two screws on the back of the terminal.
Step 2 Align the screw holes on the belt clip with those on the terminal, and then tighten the screws, as
shown in the figure below.
3.5
Attaching the Accessories
Step 1 Loosen the screw on the accessory connector cover, and open the cover as the arrow shows in
the figure below.