9
The repeater can be installed in a rack, bracket and cabinet or on a desk.
3.
Installation Tool
Tools required for installing the repeater include a cross head screwdriver, a torx
screwdriver and a spanner.
Note: please refer to
Safety Information Booklet
for more information.
Before Installation
1.
Voltage Check
Please check whether the voltage of DC power or external battery meets the repeater
specifications.
2.
Product Check
Please check whether the repeater works properly by observing the 8 LEDs located on
the front panel.
3.
Parameter Configuration
When the repeater proves to work normally, configure appropriate parameters according
to your actual requirements. And then you can proceed with on-site installation.
Installation Steps
Install the repeater as follows:
1. Install the repeater at a proper location;
2. Attach all necessary accessories;
3. Ground the repeater through the Ground Screw located on the rear panel.
Note: if the repeater needs to work with a duplexer, you should implement the
following operations before installation.
1.
Loosen the three screws on the bracket with a cross head screwdriver.
