8
¾
Do not scrape the silicone waterproof pad surrounding the screw hold of the accessory connector.
¾
Do close the accessory connector cover and fasten the screw after removing the accessory.
Step 1
Loosen the screw fixing the accessory connector cover, and open the cover as shown below.
Step 2
Align the accessory (such as an audio accessory or a programming cable) plug with the
accessory connector.
Step 3
Tighten the screw on the accessory plug.
3.6
Charging the Battery
Caution
Use the charger specified by the Company to charge the battery.
Be sure to charge the battery fully before initial use, since reduction of state of charge (SoC) may lead to
low battery alarm. You can charge the standalone battery or the radio with battery attached. It is
