Your radio supports three Emergency modes. You can select one of them via your dealer (Note: For the
following operation methods, we take the “Regular” type as an example).
Emergency Mode
Description
Alarm
In this mode, you can send alarm information to your
companion or control center by pressing the programmed
Emergency
key, but you cannot talk with them.
Alarm with Call
In this mode, you can send alarm information by pressing
the programmed
Emergency
key. When the icon
appears, you can speak into the microphone, allowing your
voice and background noise to be transmitted
automatically (you do not need to hold down the
PTT
key).
Call Only
In this mode, press the programmed
Emergency
key to go
to the Revert Channel. When the icon
(
) or
(
) appears, you can speak into the
microphone, allowing your voice and background noise to
be transmitted automatically (you do not need to hold
down the
PTT
key).
Operation Methods for Analog Emergency
Alarm (None & HDC1200)
Operation
: Press the programmed
Emergency
key to send alarm information. The radio displays the
icon
and text information “Sending Alarm”, with red LED glowing. (None: If “Local Emergency
Alarm” is enabled via the programming software, an alarm tone will sound.)
Two methods are available for you to exit the Emergency mode:
1. Once the Alarm Cycles expire, the radio will exit the Emergency mode automatically.
2. Long press the programmed
Emergency
key.
30
Alarm with Call (None & HDC1200)
