|
Troubleshooting
- +
support.
Phenomena
Analysis
Solution
~ [%
The battery may be improperly installed.
Remove the battery and reassemble it.
The battery power may be used up.
Recharge or replace the battery.
The battery is poorly connected due to dirtied or
damaged battery contacts.
Clean the battery contacts. If the problem cannot be solved, contact
*
During receiving,
the voice is weak,
discontinuous or totally
inactive.
The battery voltage may be low.
Recharge or replace the battery
The volume level may be low.
Increase the volume by rotating the
Volume Control
knob.
The antenna may be loosened or improperly installed.
Reassemble the antenna after turning off the radio.
The speaker may be blocked or damaged.
Clean the surface of the speaker. If the problem cannot be solved,
*
repair
You cannot
communicate with
other members.
The frequency or signaling may be inconsistent with
that of other members.
@ "$ +
other members.
T h e c h a n n e l t y p e ( d i g i t a l / a n a l o g ) m a y b e s e t
inconsistently.
Make sure all members are on the same digital/analog channel.
You may be too far away from the group members.
Move towards other members.
Irrelevant
communication or
noise is heard on the
channel.
You may be interrupted by radios using the same
frequency.
# + +
The radio may be set with no signaling.
@
same frequency. And change the signaling settings for all portable
radios at the same time.
The noise is too loud.
You may be too far away from other members.
Move towards other members.
You may locate in an unfavorable position. For
0
high buildings or frustrated in the underground areas.
]
electromagnetic interference).
@ +
Содержание PD682 Um
Страница 9: ...2 Product Overview Product Controls ...
