Hytera HYT TC-310 Скачать руководство пользователя страница 2

 

1

Icon Information   

The following icons are available through this manual:   

 

Warning/Caution:

 

represents important safety information, to make users   

       aware 

of 

misoperations 

that may cause malfunction of the 

       radio, 

personal 

injury 

or 

property 

damage. 

 

 

Note:

     

 

 

indicates important information which helps you make   

       better 

use 

of 

your 

radio. 

 

 

 

Copyright Information   

HYT and CRS are registered trademarks of HYT in P.R.C and other countries and/or 

areas. HYT retains the ownership of its trademarks and product names. All other company 

and/or product names used in this manual are trademarks and/or registered trademarks of 

their respective owners.   

 

 

Disclaimer  

HYT endeavors to achieve the accuracy and completeness of this manual, but no 

warranty of accuracy or reliability is given. All the above specifications and designs are 

subject to change without notice due to continuous development. No part of this manual 

may be copied, reproduced, translated, stored in a retrievable system, distributed, or 

transmitted in any form or by any means, electronic or mechanical, for any purpose 

without the express written permission of HYT.   

 

 

 

 

 

 

Содержание HYT TC-310






























Отзывы: