6
3.2.2
Before Installation
Voltage Check
Please check whether the voltage of DC power or battery meets the repeater specifications (28V
±
15%).
Product Check
Please check whether the repeater works properly by observing the eight LEDs located in the front
panel.
Parameter Configuration
Having confirmed that the repeater works properly, you can let your dealer configure the parameters for
the repeater based on your actual needs (such as Frequency Range, TX Power, etc.), and then you can
proceed with on-site installation.
3.2.3
Installation Procedures
Follow the steps to install the repeater:
1. Install the repeater at a proper location;
2. Connect accessories such as the antenna, feed line and power cord to the repeater.
3. Ground the repeater through the ground screw located on the rear panel.
3.3
Installing the Duplexer (Optional)
If the repeater needs to work with a duplexer, you should implement the following operations before
installation.
1. Loosen the three screws on the bracket with a crosshead screwdriver. See the following figure:
2. Install the duplexer onto the bracket.
