S559/5
INSTALLATION
1. If no wall-mounting bracket is supplied, mount on a horizontal surface
using the holes provided in the pump feet, or use a tank/barrel mount
adaptor if provided.
2. Fit the supplied strainer to the pump inlet.
3. Connect the pipe from the tank to the suction inlet of the pump. If the
pump is more than 2m from the tank the pipe should be 1½ diameter
reducing to the appropriate size just before the pump inlet. Seal the
threads with a suitable thread-sealing compound.
4. Connect a suitable “soft wall” hose to the pump outlet. In turn, fit a
suitable trigger or automatic nozzle onto the hose. Seal both with a
suitable thread-sealing compound.
5. Connect the flying lead to a suitable power supply, fused at 10 amps
for 230v AC and 16A for the 110v AC as follows:
230v AC: Brown – Live
Blue – Neutral
Yellow/Green – Earth
6. To prime the pump, first ensure the pump is switched off, there is fuel
in the tank, and the end of the suction hose is fully immersed. Remove
the filter cap and pour in fuel until the pump chamber is full. Replace
the filter cap and operate as per instruction for use.
Содержание SPT80A
Страница 5: ...S559 5 DIMENSIONS ...
Страница 7: ...S559 5 NOTES ...