Features
7. Monitor
Press [MONI] button to monitor activity on the current channel.
8. Channel Scan
Channel scan is set to monitor desired activities on all channels in scan list. When channel
scan is enabled, the radio will automatically scan all channels in scan list until activity is
detected on a channel. The radio will then lock on to that channel for communication.
When scanning stops on an active channel, it will restart in the preset restart mode set by the
dealer. Scan restart mode can be either Time operated scan or Carrier operated scan.
Time Operated Scan
Scan stops on the busy channel for only the preset time (preset by the dealer) before it
resumes scanning. The radio will begin scanning other channels even if the channel is still
busy.
Carrier Operated Scan
Scan stops on the busy channel until there is no activity.
Channel scan operation is shown as following:
1. Press [SCAN] key, scan starts from the current channel and then scrolls all selected
channels in sequence.
2. Press [UP] or [DOWN] key to change channel scan sequence. Press the [UP] key, radio
skips the current channel and scans other selected channels in ascending order; press the
[DOWN] key, radio skips the current channel and scans other selected channels in
descending order.
3. Press [SCAN] key again, scan stops.
4. The dealer can add or delete a channel to/from the scan list. Only channels in the scan list
can be scanned.
9. Priority Channel Scan
If your dealer has set a priority channel, when radio scans non-priority channels, it will
periodically detect the priority channel. If activity is detected on the priority channel, it will
switch to the priority channel for communications.
10.Scan Revert Channel
The scan revert channel feature allows you to transmit on the proper channel while initiating a
call during channel scan. Press [PTT] button, radio stops scanning and transmits on the revert
channel. This feature is set by the dealer.
9
