this radio by the manufacturer or an antenna specifically authorized by the manufacturer
for use with this radio.
• DO NOT
transmit for more than 50% of total radio use time (“50% duty cycle”).
Transmitting more than 50% of the time can cause FCC RF exposure compliance
requirements to be exceeded. The radio is transmitting when the “TX indicator” lights red.
You can cause the radio to transmit by pressing the “PTT” switch.
• ALWAYS
use HYT authorized accessories (antennas, batteries, belt clips, speaker/mics,
etc). Use of unauthorized accessories can cause the FCC RF exposure compliance
requirements to be exceeded. Body-worn operations are restricted to belt-clips, holsters
or similar accessories that have no metallic component in the assembly and that provide
at least 1.5 cm separation between the device, including its antenna, and the user's body.
To provide the recipients of your transmission the best sound quality, hold the antenna at
least 5 cm (2 inches) from mouth, and slightly off to one side. The information listed above
provides the user with the information needed to make him or her aware of RF exposure,
and what to do to assure that this radio operates within the FCC RF exposure limits of this
radio.
Electromagnetic Interference/Compatibility
During transmissions, your HYT radio generates RF energy that can possibly cause
interference with other devices or systems. To avoid such interference, turn off the radio in
areas where signs are posted to do so.
DO NOT
operate the transmitter in areas that are
sensitive to electromagnetic radiation such as hospitals, aircraft, and blasting sites.
