TC-700P Service Manual
4
Software Specifications
Status Indications
Operation/Function
LED Indication and Alert Tone
To enter Wired Clone mode:
For the source radio, turn it on while holding down
PTT
and
SK2
.
For the target radio, turn it on directly.
The LED on the source radio
flashes red once upon power-on.
Status of the source radio in Wired Clone mode
(After the target radio is turned on and the cloning
cable is connected, press
PTT
of the source radio
to begin cloning.)
The LED glows red during
cloning.
The LED goes out if cloning is
completed successfully.
The LED flashes orange if
cloning fails.
Wired
Clone
Mode
Status of the target radio in Wired Clone mode
The LED glows green during
cloning.
The LED goes out if cloning is
completed.
To enter Wireless Clone mode:
In Wired Clone mode, press
SK2
of the source
radio and target radio respectively to switch to
Wireless Clone mode.
The LED on the source radio
and the target radio flashes
green once respectively.
Wireless
Clone
Mode
Status of the source radio in Wireless Clone mode
(After the source radio and target radio are powered
on properly and are operating on the same channel,
press
PTT
of the source radio to start cloning.)
The LED glows red during
cloning.
The LED glows orange if cloning
is completed.
Содержание TC-700P
