15
The Time-Out-Timer (TOT) is used to prevent someone from using the same channel for
a long time and to prevent the radio from damage due to continuous transmission.
If the transmission exceeds the preset time (it’s set by your dealer), transmission will be
inhibited
and a beep tone will sound. To stop the beep tone, release the
[PTT]
key. Press
the
[PTT]
key again to
resume transmitting
.
■
TOT Reset Time
When this feature is
activated
, TOT won’t reset until
the preset TOT Reset Time
(it’s set by
your dealer) expires, even if you have released the
[PTT]
key.
■
TOT Rekey Time
TOT Rekey Time is the duration that transmission is resumed after being inhibited by TOT.
When this feature is activated,
transmission will remain
inhibited
until
the preset TOT
Rekey Time
(it’s set by your dealer) expires, even if you have pressed the
[PTT]
key.
■
TOT Pre-Alert
Your dealer can program a TOT Pre-Alert feature to alert you just before the TOT expires.
When this feature is
activated
, the radio will sound an alert tone at the preset TOT
Pre-Alert time
(1-255s before the TOT expires
)
. Transmission will be inhibited by TOT
after this time.
Battery Save
The Battery Save feature is enabled by your dealer to minimize the power consumption.
When there is no activity on the channel and no operation is performed for 10 seconds,
the Battery Save feature is automatically activated. When a signal is received or an
operation is performed, the Battery Save feature is automatically deactivated.
Low Battery Alert
Low Battery Alert alerts you to recharge or replace the battery. During transmission, when
the battery voltage goes below a preset value, the LED indicator will flash red. When the
alert tone sounds, the radio stops transmitting. Please recharge or replace the battery.
