25
Monitor
Holds down the programmed Monitor key to enter Monitor mode, and release it to exit.
Scan
The Scan feature enables a two-way radio to continuously scan each channel for activity.
Press the programmed
Scan
key to initiate scanning channels in the order as they appear
in scan list. Green LED flashes during the scan process, and solidly glows when activity is
detected and signaling condition is satisfied on a channel. Press the key again to exit
scanning.
When scanning is active, the radio continuously scans for activity on scan list members.
Once activity is detected on a channel, scanning pauses on the active channel for you to
receive activity. Your dealer can choose channels that you wish to scan and list them in a
scan list.
No Priority Channel
Assuming a scan list with 6 channels, if all the channels are non-prioritized, the normal
scan operation would proceed in the following sequence, as shown in figure 1.
Figure 1 Normal Scan Sequence
Priority Channel Scan
If you prioritize Channel 2 as Priority 1, the scan operation would proceed in the following
sequence, as shown in figure 2.
