HYT TC-1600 Скачать руководство пользователя страница 7

Страница: 7 / 32

－

1600 Owner’s Manual

Battery Information

Initial Use of the Battery

The battery is not fully charged at the factory. Please charge the new battery before initial

use. In general, the battery should be charged for 12 hours before initial use, which is

suitable for Ni-Cd, Ni-MH or Li-ion battery charged with slow or rapid charger. It is

recommended to take this step during the first three times of use. When the battery power

is low, it needs to be charged.

Applicable Battery Packs

Charge only the HYT approved battery packs. Other batteries may burst and cause

personal injury.

Safety attention

1. Conductive metals including jewelry, key, etc, may result in short circuit, discharge,

generation of a large quantity of heat, or leakage when coming into contact with battery

contacts or electrodes. To avoid damage to articles or human injury, treat any battery with

care.

Do not short out the battery terminals or dispose of the battery in fire. Never attempt to

disassemble the battery. If discarded, the battery should be thrown into dedicated battery

recycle box.

Normal operation

★

Please charge the battery indoor to ensure the optimal charging effect.

★

In general, the battery can be removed if the charger indicator turns from red to green.

★

Turn off the radio when charging the battery inside the radio.

★

Do not charge the battery if its power hasn’t been used up (

if the power used up, the

battery meter flashes)

, otherwise, the battery life will be shortened.

★

Do not return fully charged batteries to the charger for an “extra boost”. This action will

significantly reduce cycle life.

To prolong battery life

★

Battery performance will be greatly decreased under -20

℃

temperature. Please use

back-up battery in cold weather. The cold battery unable to work in this situation may work

under room temperature, so keep it for later use.

★

The dust on the battery contact may affect the life cycle of the battery. Please use

clean dry cloth to wipe it before the insertion of the battery into the radio.

Battery storage notice

1. Due to the self-discharge, the battery which will not be used for a long time should be

stored after full charge to avoid the damage to the battery because of over-discharge.

Содержание TC-1600

































Результаты поиска

Содержание TC-1600

Отзывы:

Похожие инструкции для TC-1600

Бренды по названию

Популярные бренды

HYT TC-1600, Руководство пользователя

Результаты поиска

Содержание TC-1600

Отзывы:

Похожие инструкции для TC-1600

Бренды по названию

Популярные бренды