C
B
SETTING THE TImE
Pos C.
10 minutes
= 1 crown movement
= 1 sec of travel
Zone I
Zone II
INTRODUCTION
This function allows the time shown on your watch to be set using the crown.
IMPORTANT
•
Moving the microfluids within the capillary
3
should be approached with as much
caution as setting a perpetual calendar or a minute repeater
•
We highly recommend that the fluid is only moved 10 minutes with each movement
of the crown
•
This should mean that moving the fluid a full hour takes no more than 12 seconds.
HOW TO USE
•
Unscrew the crown and pull it out to position “C”
•
Then turn the crown in either direction until the coloured liquid (hour display) and the
minute hand is at the time required
•
Push the crown in completely against the case
•
Do not forget to screw in the crown completely to ensure its water resistance.
RETROGRADE
•
The automatic return of the coloured liquid
(retrograde)
4
is allowed by the pressure of the two
bellows
2
. The speed is higher when the retrograde
4
starts in “Zone II” and is minimal when the liquid
approaches its starting point in “Zone I”.
10
HYT
WATCHES - KAIROS TECHNOLOG
Y
SWITZERLAND
(KTS)
SA - Rue de PRébARReAu 17
-
2000 NeucHâTel - SwiTzeRlANd - www.HYTwATcHeS.com
Содержание h3
Страница 1: ...INSTRUCTION manual AND GUARANTEE H3 ...
