HYT H0, Инструкция по эксплуатации и гарантия

Страница: 9 / 11

9 HYT SA - Rue de PRébARReAu 17, 2000 NeucHâTel - SwiTzeRlANd - PHoNe + 41 32 323 27 70 - www.HYTwATcHeS.com
B
SETTING THE TImE
Pos B.
10 minutes = 1 crown movement
= 1 sec of manipulation
INTRODUCTION
This function allows the time shown on your watch to be set using the crown.
IMPORTANT
• Moving the microfluids within the capillary 3 should be approached with much caution
• We highly recommend that the fluid is only moved 10 minutes with each movement
of the crown
• This should mean that moving the fluid a full hour takes around 6 seconds.
HOW TO USE
• Pull the crown out to position “B”
• Then turn the crown in either direction until the colored liquid (hour display) and the
minute hand is at the time required
• Push the crown in completely against the case.
REWIND
• The automatic return of the colored liquid (rewind) 4
is allowed by the pressure of the two bellows 2 . The
speed is higher when the retrograde 4 starts in “Zone
II” and is minimal when the liquid approaches its
starting point in “Zone I”.
Zone I Zone II