HYT FLOW, Инструкция по эксплуатации и гарантия

Страница: 4 / 12

7
8
9
10
11
12
1
2
3
4
5
A
B
PRECaUTIONS fOR USE
Your HYT watch is set and ready to be worn.
Time is displayed with two liquids. One is colored, the second one is transparent. One
shows the elapsed time, while the other liquid illustrates a time yet to come. Their meeting
point is a meniscus in the capillary
4
, aka the now.
Important :
If you plan to not wear the watch for
a while, the colored liquid has to be stored in its
own reservoir (on the left bellow
3 ).
To do this, pull the crown out to position B
(time setting). Allow the colored liquid to move
into “Zone II” until it starts rewinding. Once the
rewinding phase is complete (colored liquid in
“Zone I”), ensure that the crown remains in the
time setting position B. Your watch is now ready to
be stopped for an extended period.
The capillary
4
is then filled with transparent
liquid (it is possible to still see some colored
liquid in “Zone I”).
Produced and tested to stringent criteria, the constituent components of your HYT
watch together form an exceptionally water resistant unit. To ensure these qualities are
preserved, we recommend that you have the gaskets replaced during a service at an
authorized retailer. Temperature variations, moisture, perspiration or repeated impacts
may adversely affect its water resistance over the years.
With its water resistant case, your HYT watch is fully washable. It should be cleaned
regularly in lukewarm, soapy water, rinsed and then carefully dried with a soft cloth. After
exposure to sea water, rinse your HYT watch in fresh water.
Zone I Zone II
4
HYT
WATCHES - KAIROS TECHNOLOG Y SWITZERLAND (KTS)
SA - Rue de PRébARReAu 17
-
2000 NeucHâTel - SwiTzeRlANd - www.HYTwATcHeS.com