32.
Place blocks under the axle assembly. Connect
slings and lifting device to axle assembly.
33.
Remove the capscrews and the drive shaft from
the drive axle.
34.
Remove the four mounting capscrews and
washers from the drive axle. See Figure 8.
35.
Remove blocks and lower the drive axle assem-
bly. Pull axle forward and away from frame.
36.
Place blocks under the differential assembly.
37.
Remove cooling return hoses from manifold and
drive axle. See Figure 7.
38.
Disconnect cooling return to transmission hose
from manifold. See Figure 7.
39.
Disconnect cooling supply from transmission
hose from manifold. See Figure 7.
40.
Disconnect axle vent line from drive axle. See
Figure 7.
41.
Remove cooling supply lines from manifold and
drive axle. See Figure 7.
42.
Remove two socket head screws and manifold
from drive axle. See Figure 7.
43.
Disconnect brake lines from drive axle. Remove
brake lines with cross fitting, as an assembly,
from drive axle. See Figure 7.
1. CAPSCREW
2. WASHER
3. DRIVE AXLE
Figure 8. Drive Axle Mounting Capscrews
Planetary Reduction Gear Repair
REMOVE AND DISASSEMBLE
Refer to Figure 9 and Figure 10 for the following repair procedures.
Drive Axle Removal
1400 SRM 1344
12