Maintenance Schedule
8000 SRM 1226
Table 1. Maintenance Schedule (Continued)
Item
No.
Item
8 hr/
1 day
500 hr/
3 mo
1000 hr/
6 mo
2000 hr/
1 yr
Procedure or
Quantity
Specification
Oil Leaks
X
Check for Leaks
Safety Labels
X
Replace as
Necessary
See Parts Manual
Battery
X
Check Condition
See NOTE 5
Seat Belt and Seat Rails
X
CIL
Check Condition
Seat Plate Pivots
L
Use Silicone spray
(Hyster Part
Number 328388)
See NOTE 2
Seat Switch
X
Check Operation
Battery Restraint
X
Check operation
Steering Column Tilt
Mechanism
X
Lubricate as
Necessary
Use Silicone Spray
(Hyster Part Number
328388)
Hydraulic Control Levers
X
Lubricate as
Necessary
Use Silicone Spray
(Hyster Part Number
328388)
NOTE 1:
Multipurpose grease with 2 to 4% Molybdenum Disulfide.
NOTE 2:
Service interval is for trucks working in a clean and dry warehouse environment. Trucks working in more severe
environments (dirty, dusty, corrosive, or wet environments) should reduce service intervals as advised by your dealer for
Hyster lift trucks based on their survey of the application.
NOTE 3:
Lubricate lower spindle bearings at 1000 hours and upper bearings during assembly. If truck is used outdoors
or on wet floors, lubricate lower spindle bearings at 250 hours.
NOTE 4:
If lift truck is used outdoors or on wet floors, reduce service interval to 500 hours.
NOTE 5:
Equalization charge is required approximately each month.
NOTE 6:
Replace Hydraulic filter after first 100 hours.
NOTE 7:
Replace the contacts in the contactors when the thickness is 30% of a new contact. See for procedures.
NOTE: Never use steam to clean electrical parts.
X=Check C=Change L=Lubricate CIL=Check Indicator Light during operation
6
