Hyster A1.3-1.5XNT, Руководство по обслуживанию

Страница: 70 / 124

System Off/Alert Screens
INTRODUCTION
Several screens appear only briefly on the Operat-
ing Screen. These include the System Off Screen
and Alert Screens. The purpose of the System Off
Screen is to supply brief status information as the
system is powered off. Alert Screens appear mo-
mentarily to attract attention. The topics that fol-
low provide more information about these types of
screens.
SYSTEM OFF SCREEN
When the lift truck power is first turned OFF, the
System Off Screen is displayed for five seconds. The
system will also display this screen for five seconds
if the Scroll Forward Key (—
▸
) is pressed while
the truck is powered off. Figure 13 shows the Sys-
tem Off Screen.
1. TRUCK HOUR METER
2. PUMP HOUR METER
Figure 13. System Off Screen
The System Off Screen displays the Truck Hour
Meter in the upper right corner of the Operating
Screen and the Hydraulic Pump Hour Meter in the
lower right. If equipped, the System Off screen can
show any two of the following four hour meters.
• The Truck Hour Meter shows the total time
the operator has been in the seat with the
key or keyless switch in the ON position.
• The Pump Hour Meter shows the total time
the hydraulic pump has been running.
• The Traction Hour Meter shows the total
time on traction motor while the truck has
been moving.
• The Secure Hour Meter shows the total time
the operator has been in the seat with the
key or keyless switch in the ON position and
cannot be reset.
• The time shown on the meters is displayed in
hours, but the system stores the values to
the nearest 0.1 hour.
Truck Hour Meter Icon
Traction Hour Meter
Icon
Pump Hour Meter Icon
Secure Hour Meter
Indicator Icon
System Off/Alert Screens 2200 SRM 1336
64