Page 2
Introduction
Sometimes it almost feels like it is necessary to have a third hand while working
on various guns. In addition, people who really know about guns always
recommend cleaning the gun from the breech with the barrel angled down. When
cleaning the gun from the breech end you avoid damage to the muzzle crown. In
addition, with the barrel angled down all the debris and gunk from the cleaning
process run out the end of the barrel and not back into the action and trigger
group. The HYSKORE
®
#30278 Bench Top Armorer’s Vise makes all of these
processes easy and convenient for the shooter. Some guns are relatively easy to
support during the cleaning process; however, guns like the AR type platform,
which are hinged at the forward take down pin are most easily serviced if they
are supported in a fixture. The Armorer’s Vise allows you to set the gun at the
absolutely perfect angle for easy of cleaning and servicing.
As with all HYSKORE
®
products the vise is constructed from heavy duty welded
steel sections with a powder coat finish. All of the gun contact surfaces have a
generous foam pad to avoid damage to delicate finishes and surfaces. The clutch
assembly is made from sturdy Delrin that provides excellent function and long
service life.
