3501 Actuator
INSTALLATION REFERENCE MANUAL
2
www.hysecurity.com • 800-321-9947
MX4754 Rev. B ©2019
TABLE OF CONTENTS
LIST OF INSTRUCTIONS
INSTRUCTION 1:
DETERMINE LOCATION OF MOUNTING POST ..................... 5
INSTRUCTION 2:
DETERMINE HEIGHT OF MOUNTING POST ........................... 6
INSTRUCTION 3:
WELD MOUNTING BRACKET TO POST ................................... 7
INSTRUCTION 4:
MOUNT CHASSIS TO POST ...................................................... 8
INSTRUCTION 5:
MOUNT PRIMARY ARM COLLAR TO DRIVE SHAFT................. 9
INSTRUCTION 6:
ATTACH PRIMARY ARM TO ARM COLLAR ............................. 10
INSTRUCTION 7:
ASSEMBLE ARM ASSEMBLY .....................................................11
INSTRUCTION 8:
AFFIX GATE BRACKET TO ACTUATOR ARM ..........................13
INSTRUCTION 9:
INSTALL GATE BRACKET TO GATE SUPPORT ........................15
INSTRUCTION 10:
WIRE ACTUATOR CABLE TO CHASSIS TERMINAL STRIP ....16
INSTRUCTION 11:
RUN ACTUATOR CABLE(S) TO CONTROL BOX ...................17
INSTRUCTION 12A:
WIRE ACTUATOR CABLE TO CONTROL BOARD (LEFT) ...18
INSTRUCTION 12B:
WIRE ACTUATOR CABLE TO CONTROL BOARD (RIGHT) .19
INSTRUCTION 12C:
WIRE ACTUATOR CABLE TO CONTROL BOARD (DUAL) .. 20
INSTRUCTION 13:
INSTALL CONTROL BOX AND APPLY POWER ................... 20
INSTRUCTION 14:
SET OPEN AND CLOSE LIMIT COLLARS ................................. 21
INSTRUCTION 15:
WELD OR BOLT GATE BRACKET TO GATE ......................... 22
INSTRUCTION 16:
MANUALLY OPENING THE GATE ....................................... 23
SECTION 1: 3501 ACTUATOR OVERVIEW ..........................................................3
SECTION 2: INSTALLATION SAFETY ..................................................................4
SECTION 3: TOOLS NEEDED FOR INSTALLATION ............................................4
SECTION 4: 3501 ACTUATOR MECHANICAL INSTALLATION ...........................5
SECTION 5: ACTUATOR WIRING
CONNECTIONS ...........................................16
5.1 CHASSIS WIRING .........................................................................................16
5.2 CONTROL BOARD WIRING...........................................................................18
SECTION 6: PART DRAWINGS ..........................................................................24
SECTION 7: WARRANTY .................................................................................. 26
