11
This furnace must be wired by a qualified electrician
In accordance with the National or/and County/State Electrical Code.
Wiring running to house
12/2 with Ground will run from inside house, and will connect to your HyProTherm
Furnace
under the back access door, as will the thermostat wires.
Black (A) goes to 110 VAC 20 Amp circuit breaker (or 30 amp for 4000 models) in
the house, and connects to the black wire on your
outdoor furnace.
White (B) goes to circuit breaker box - common connections, and connects to the
white wire on your outdoor furnace.
Ground wire (C) is grounded in circuit breaker box, and connects to bare copper
ground wire on your outdoor furnace.
Wiring up your house thermostat
Purchase a simple, 2-wire thermostat (a simple ON/OFF switch) use those 2 wires
to connect to the 2 thermostat wires of your outdoor furnace. (D)
