Hypro HY160, Руководство по эксплуатации

Страница: 19 / 28

19
TECHNICAL INFORMATION
Serial Number Location
Record the engine serial number in the space
below. You will need this serial number when order-
ing parts and when making technical or warranty
inquiries.
Engine serial number: ______________________
Battery Connections for Electric Starter
Use a 12-volt battery with an ampere-hour rating of
at least 18 Ah.
Be careful not to connect the battery in reverse
polarity, as this will short circuit the battery charging
system. Always connect the positive (+) battery
cable to the battery terminal before connecting the
negative (-) battery cable, so your tools cannot
cause a short circuit if they touch a grounded part
while tightening the positive (+) battery cable end.
A battery can explode if you do not follow the
correct procedure, seriously injuring anyone
nearby.
Keep all sparks, open flames and smoking
materials away from the battery.
1. Connect the battery positive (+) cable to the
starter solenoid terminal as shown.
2. Connect the battery negative (-) cable to an
engine mounting bolt, frame bolt, or other good
engine ground connection.
3. Connect the battery positive (+) cable to the
battery positive (+) terminal.
4. Connect the battery negative (-) cable to the
battery negative (-) terminal.
5. Coat the terminals and cable ends with grease.
Remote Control Linkage
The throttle and choke control levers are provided
with holes for optional cable attachment. The fol-
lowing illustrations show installation examples for a
solid wire cable and for a flexible, braided wire
cable. If using a flexible, braided wire cable, add a
return spring as shown.
It is necessary to loosen the throttle lever friction
nut when operating the throttle with a remotely-
mounted control.
Models: 2541-0043 thru 2541-0046
Technical & Consumer Information