Hypex Electronics FusionAmp FA122, Руководство пользователя

Страница: 10 / 20

10
Connections one-way models
❶
Balanced analogue I/O:
Differential (also known as balanced) analogue input.
Refer to chapter Technical Specifications for more
information.
❷ Unbalanced analogue input:
A stereo input signal is internally mixed to mono. For
mono use, simply connect only the relevant channel.
❸
USB:
Can be used to configure the DSP. This connection
does not support USB audio.
❹
LED Indicators and button:
Clip or Limit indication
Prot: Random blinking: Amplifier limits
Steady on: Fatal / DC Error
Once per second: High temperature
Twice per second: Over temperature
Preset:
P1: Preset 1 selected
P2: Preset 2 selected
P3: Preset 3 selected
Preset selection:
The selected preset is lid by default, to change the
selected preset, short press the select button.
❺
High level input:
The high level input can be used to connect to your
existing amplifier if no pre-out is available.
❻
Remote I/O:
Connects to the remote of other FusionAmps.
❼ Gain adjust:
A manual offset can be set using the gain knob. This is
especially useful in subwoofer applications: for
instance to add that little bit of extra punch during
your favourite action movie.
By default, the gain offset can be adjusted by 6dB in
both directions. The volume of the one-way model can
be set using HFD or via the optional remote.
Connections multi-way models
❶
Balanced analogue I/O:
Differential (also known as balanced) analogue input.
Refer to chapter Technical Specifications for more
information.
❷
Unbalanced analogue input:
A stereo input signal is internally mixed to mono. For
mono use, simply connect only the relevant channel.
❸ USB:
Can be used to configure the DSP. This connection
does not support USB audio.
❹
LED Indicators:
Clip or Limit indication
Prot: Random blinking: Amplifier limits
Steady on: Fatal / DC Error
Once per second: High temperature
Twice per second: Over temperature
Preset:
P1: Preset 1 selected
P2: Preset 2 selected
P3: Preset 3 selected
Preset selection:
The selected preset is lit by default. To change the
selected preset, short press the select button.
Digital channel selection:
Digital signal carries both left and right signal.
Therefore, the desired channel can be configured
using HFD.
To display the selected channel setting, hold the select
button for 3 seconds, the selected channel mode
starts blinking.
Left: Left digital channel selected
Right: Right digital channel selected
L/R: Both digital channels mixed into mono
To change the selected channel mode, hold the select
button after the long press. Every 1.5 seconds, the
channel mode is switched.
❺
AES digital I/O:
AES3 (2-channel digital audio)
❻
S/PDIF digital I/O:
S/PDIF
❼ EIAJ optical:
EIAJ optical / Toslink
11
AES in
through
in
out
unbal
analogue in
through
AES in
through
P1 / Left
in
S/PDIF
Select
P2 / Right
P3 / L+R
Prot
optical
out
t
u
p
n
i
t
u
p
t
u
o
❶ ❷
❸
❺
❹
❻
❼
- R + - L +
P1
Select
P2
P3
Prot
high level input gain
unbal
analogue in
through
remote
t
u
p
n
i
t
u
p
t
u
o
❶ ❷
❸
❺
❻
❹
❼