Hypertherm XPR170, Инструкция по эксплуатации

Страница: 205 / 438

Operation
6
XPR300 Instruction Manual 809480 205
Indicators
Power-indicator LEDs
Light emitting diodes (LEDs) illuminate to indicate power status.
The power-indicator LED on the plasma power supply ( Figure 56 ) uses 2 colors to indicate power
status:

The LED illuminates amber when the plasma power supply is receiving electric power and
the remote on-off switch is in the OFF position.

The LED illuminates green when the plasma power supply is receiving electric power and
the remote on-off switch is in the ON position.

The plasma power supply that came with early XPR300 cutting systems has a green-only
power-indicator. A power-indicator LED upgrade kit (428893) is available from Hypertherm
if you want a 2-color LED for your plasma power supply.
Figure 56 – Power-indicator LED on the plasma power supply
When illuminated, the green power-indicator LED on the gas connect console ( Figure 57 on
page 206) and torch connect console ( Figure 57 on page 206) indicate that:

Power is supplied to the XPR cutting system.

The line-disconnect switch or breaker for the unit is set to the ON (I) position.

The unit is ready for use.