2-4
D
ESCRIPTION
& S
PECIFICATIONS
Operator Manual
Weight .................................................................. 65 pounds (30 kg) without wheels
72 pounds (33 kg) with wheels
128 pounds (58 kg) for 600V power supply
Gas Type .............................................................. Air or Nitrogen
Gas Quality, Air .................................................... Clean, dry, oil-free
Gas Quality, Nitrogen ........................................... 99.995% pure
Gas Inlet Pressure ................................................ 90 psi (6.2 bar)
Gas Flow .............................................................. 320 scfh/5.3 scfm at 90 psi (150 l/min at
6.2 bar) supplied to power supply pressure
regulator
Power Supply pressure regulator setting ............. 70 psi (4.8 bar) flowing
PAC121 50A TORCHES
Maximum 50A Cutting Capacity (PAC121TS) ...... 3/4" (20 mm) @ 50% duty cycle
Maximum 50A Cutting Capacity (PAC121MS) ..... 3/8" (10 mm) @ 50% duty cycle
Maximum 35A Cutting Capacity (PAC121MS) ..... 1/4" (6 mm) @ 100% duty cycle
Maximum current at 50% duty cycle .................... 50 amps
Gas Flow .............................................................. 320 scfh/5.3 scfm at 70 psi (150 l/min at
4.8 bar)
Gouging Capability (metal removal rate) .............. 6.3 pounds (2.9 kg)/hr
Weight PAC121TS ............................................... 4.5 pounds (2 kg) with 25 ft (7.6 m) lead
7 pounds (3.2 kg) with 50 ft (15 m) lead
Weight PAC121MS .............................................. 7 pounds (3.2 kg) with 25 ft (7.6 m) lead
9.5 pounds (4.3 kg) with 50 ft (15 m) lead
Figure 2-4 PAC121MS Torch with Dimensions
15.06"
1.38"
1.00"
PAC121MS Machine Torch Assembly
10-96
Figure 2-3 PAC121TS Torch with Dimensions
1.00"
3.10"
8.72"
8.50"
1.58"
PAC121TS Hand Torch Assembly