Hypertherm HyPerformance HPR400XD Скачать руководство пользователя страница 38

Страница: 38 / 355

SpecificationS

2-14

HPR400XD Auto Gas –

806160

Symbols and Marks

Product Name

Manual Type Part # Revision #

Your product may have one or more of the following markings on or near the data plate. Due to differences and conflicts

in national regulations, not all marks are applied to every version of a product.

S mark

The S mark indicates that the power supply and torch are suitable for operations carried out in environments

with increased hazard of electrical shock according to IEC 60974-1.

CSA mark

Products with a CSA mark meet the United States and Canadian regulations for product safety. The products

were evaluated, tested, and certified by CSA-International. Alternatively, the product may have a mark by one

of the other Nationally Recognized Testing Laboratories (NRTL) accredited in both the United States and

Canada, such as Underwriters Laboratories, Incorporated (UL) or TÜV.

CE mark

The CE marking signifies the manufacturer’s declaration of conformity to applicable European directives and

standards. Only those versions of products with a CE marking located on or near the data plate have been

tested for compliance with the European Low Voltage Directive and the European Electromagnetic

Compatibility (EMC) Directive. EMC filters needed to comply with the European EMC Directive are

incorporated within versions of the product with a CE marking.

Eurasian Customs Union (CU) mark

CE versions of products that include an EAC mark of conformity meet the product safety and EMC

requirements for export to Russia, Belarus, and Kazakhstan.

GOST-TR mark

CE versions of products that include a GOST-TR mark of conformity meet the product safety and EMC

requirements for export to the Russian Federation.

C-Tick mark

CE versions of products with a C-Tick mark comply with the EMC regulations required for sale in Australia

and New Zealand.

CCC mark

The China Compulsory Certification (CCC) mark indicates that the product has been tested and found

compliant with product safety regulations required for sale in China.

UkrSEPRO mark

The CE versions of products that include a UkrSEPRO mark of conformity meet the product safety and EMC

requirements for export to the Ukraine.

Serbian AAA mark

CE versions of products that include a AAA Serbian mark meet the product safety and EMC requirements for

export to Serbia.

Содержание HyPerformance HPR400XD




































































































































































































































































































































































Результаты поиска

Содержание HyPerformance HPR400XD

Отзывы:

Похожие инструкции для HyPerformance HPR400XD

Бренды по названию

Популярные бренды

Hypertherm HyPerformance HPR400XD, Инструкция по эксплуатации

Результаты поиска

Содержание HyPerformance HPR400XD

Отзывы:

Похожие инструкции для HyPerformance HPR400XD

Бренды по названию

Популярные бренды