INTRODUCTION & SPECIFICATIONS
2-7
HT4100 Instruction Manual: Operation
Dimensions and Weight:
Width ............................................................ 28-1/4" (71 cm)
Height ...........................................................35-1/2" (90 cm)
Depth ............................................................ 41-1/4" (104 cm)
Weight ..........................................................760 pounds (345 kg)
PAC610 Machine Torch #028601
Maximum cutting thickness ..........................1-1/2 inch (38 mm)
Maximum current at 100% duty cycle .......... 260 amps for O
2
cutting
Plasma and Shield Gas Flow ....................... Refer to the
Cut Charts
in the Operation
section of the HT4100 Instruction
Manual: Operation (IM166) for specific
gas requirements.
Electrode coolant flow rate ........................... 1.4 gpm (5.3 l/min)
Weight ..........................................................3-1/2 pounds (1.59 kg)
High Frequency Console #073077
Dimensions and Weight:
Width ............................................................ 16" ( 41 cm)
Height ...........................................................16-3/4" ( 42 cm)
Depth ............................................................ 13-3/4" ( 35 cm)
Weight ..........................................................75 pounds (34 kg)
Switch Remote (SR) V/C Control (073053)
Controls ........................................................ Start button:
Activates IHS (if on) and initializes
pilot arc.
Stop button:
Deactivates main contactor in
power supplies.
IHS On/Off switch:
Turns IHS system on or off.
Auto Height On/Off switch:
Activates THC in Master power
supply.
Voltage adjust pot:
Adjusts arc cutting voltage and
displays value on LEDs.
Current adjust pot:
Adjusts arc cutting current and
displays value on LEDs.
12-14-92
