Hyperlink Extended Range WLAN Kit Installation Manual
Rev. A Page
8
Hyperlink Technologies, Inc.
System Requirements
The WaveLAN/HyperGain™ Amplified Extended Range Bridge Kit provides a
complete plug-and-play solution for linking buildings in an outdoor environment.
The PC card included can be installed in any one of the following devices:
Lucent Orinoco Central or Remote Office Router Processor
KarlNet Central or Satellite Router Processor
Other compatible PC, Router, or Bridge Processor equipped with a PC Card slot
Besides one of the host processors above, all you need to add is suitable masts
or towers and some basic site planning. Please read this manual in its entirety
before beginning the installation.
Kit Contents:
Each Kit contains the following items:
WaveLAN/Orinoco Turbo 11 Mbit IEEE 802.11 PC Card
HyperAmp Remote Mounted Amplifier
HyperGain Antenna (Omni, Yagi, Panel or Grid)
HyperGain DC Power Injector/Lightning Protector
50 ft. Antenna Cable
0.5 meter Jumper Cable
Mounting Hardware
Manual
Tools Required:
Assorted open-end or adjustable wrenches
#12-10 AWG or similar wire (for grounding)
Wire cutter / stripper
Pliers
Other Required Equipment:
Suitable mast or tower hardware
Other Helpful Equipment and Tools:
Cellular telephones or Walkie-talkies
Binoculars
Compass
Handheld GPS
