Setting Up the RetroN
®
2 HD via HD Cable
1. Insert the HD Cable into the OUTPUT PORT on the RetroN
®
2 HD.
2. Insert the other end of the HD Cable into the HD input on your HDTV.
3. Insert the MICRO CABLE into the MICRO PORT on the RetroN
®
2 HD.
4. Insert the other end of the MICRO CABLE into a power source.
*If AC Adapter is not included, we strongly recommend that you use a USB wall
AC Adapter that has a minimum output of 5V 1A.
5. Plug the AC Adapter into a power outlet.
Setting Up the RetroN
®
2 HD via AV Cable
1. Insert the AV Cable into the AV PORT on the RetroN
®
2 HD.
2. Insert the other end of the AV Cable into the AV input on the TV.
3. Insert the MICRO CABLE into the MICRO PORT on the RetroN
®
2 HD.
4. Insert the other end of the MICRO CABLE into a power source.
*If AC Adapter is not included, we strongly recommend that you use a USB wall
AC Adapter that has a minimum output of 5V 1A.
5. Plug the AC Adapter into a power outlet.
Note: Simultaneous video output using both the HD Cable and the AV Cable is
not supported.
Aspect Ratio and the Region Switches
BEFORE powering on your RetroN
®
2 HD, make sure your aspect ratio (via HD
Cable only) and region are configured. Using the incorrect region setting will
cause inaccuracies in the in-game speed.
∙ Located in the BACK of the RetroN
®
2 HD is the ASPECT RATIO SWITCH.
Moving the switch to the LEFT position indicates a 16:9 ratio. Moving the switch
to the RIGHT position indicates a 4:3 ratio. Aspect ratio can only be toggled
when using an HD Cable.
Note: Toggling between the 4:3 and 16:9 aspect ratios during gameplay might
lead to graphical glitches. We recommend powering off your console and then
adjusting your preferred aspect ratio.
∙ Located on the BOTTOM of the RetroN
®
2 HD are the region switches. With the
front of the console oriented downwards and the bottom facing you, moving
either the switch for NES
®
or Super NES
®
to the LEFT position will indicate you
are using a PAL cartridge. Moving the switch for NES
®
or Super NES
®
to the
RIGHT position will indicate you are using an NTSC cartridge.
Playing Games
1. Insert the cartridge into its appropriate slot. You can have both console
compatible cartridges inserted at the same time.
2. Use the SYSTEM SELECTOR SWITCH to choose which system you will be
playing and power on your console. Moving the switch into the UP position
selects FOR NES
®
. Moving it into the DOWN position to selects FOR SUPER
NES
®
.
3. If you would like to reset your game, press the RESET BUTTON located on the
front of the console.
