Displays during Charge, Discharge, and Cycle
and connection. For example, Lithium types when connected to a
Completion Display
When the Enter button is pressed, charge or discharge will be stopped.
e back to the main display, press the Enter button.
Data Display – Keys
TT TYPE during charging or discharging to view the data display menu.
Use INC and DEC to scroll through the data screens.
Pressing BATT TYPE again will return you to the charge/discharge screen.
a Display – Screens
(Example: During a Balancer-Connected Lithium Charge)
SHOOTING
e battery you are trying to charge and the settings on the EOS 0606i match. Battery type (such as
) Check that the input cable and output cables:
*Are not frayed, worn, cut, or damaged
side
) Attach the charger input connectors to a 12V automotive battery that is in good condition and fully charged. Wiggle the
) Try another battery for charging. If your RC battery is in poor condition, over discharged, or in some other way
Note that exact display may depend on type of battery
balancer will alternately show CHG / BLC at top left while charging, and CHG / BLC / END when finished charging. Also note
that after charging the EOS0606i may apply maintenance trickle charge or balance discharge as needed until disconnected.
In order to mov
Press BA
Dat
TROUBLE
(1) Check again that th
NiMH or Lithium), battery capacity, number of cells (charge voltage), and charge rate must all be correct.
(2
*Have proper connectors in good condition
*Are the proper gauge (2.5mm, 14ga or higher) *Are proper length – 20cm (8”) on output
(3
Terminal clips into the battery posts to insure that you have a good connection. Try the AC input if failing while using DC.
(4
CHG 030:25 00000
NC + 3.00A 10 .75V
DCH 030:25 00000
NC - 3.00A 10 .750V
END 030:00 00000
NC 100mA 10.75V
INPUT = 12.00V
OUTPUT = 23.50V
CHG: charge
e
Time in minutes : sec
Time Delay in minutes between
DCH: discharg
Charging and Discharging or
Discharging and Charging
C
→
D: cycle
D
→
C: cycle
Capacity in mAh
DELAY TIME
5 : 00
NC: NiCd
/LiFe
NM: NiMH
LP: LiPo
LF: A123
Pb: Lead-Acid
ENTER
INC
INPUT = 12.00V
OUTPUT = 23.50V
3.92 3.92 3.92V
3.92 3.91 3.93V
LCB-MAX =3.937V
LCB-MIN =3.923V
DEC
INC
LCB-[01] =3.923V
LCB-[AVG =3.930V
ChgCAPA= 400mAh
DchCAPA = 0mAh
CHG PEAK= 23.62V
DCHG AVR = 0.00V
DEC
INC
DEC
INC
DEC
INC
DEC
ENTER
CHG 0:00 00000
LP + 2.20A 22.200V
CHG 15:00 00500
LP + 2.20A 22.200V
