HyperFlight
Pulsar 4000e Assembly Guide
Rudder Servo
· Almost the same set up as the Elevator set up except the pushrod has to be very
short so a “Z Bend” was used at the rudder horn.
(see photo 125
)
· Servo is the same as for the Elevator.
Wing/plane connection
I always use the Multiplex six way “Green Connectors” for this. My choice for most of
my planes is all the +’s at one end, all the –‘s the opposite end. Two aileron
connections one side and the flaps the opposite side
(c) 2012 HyperFlight Drybank Farm Fose Way Ettington Stratford-on-Avon Warwickshire CV37 7PD
9
