Hypercable HYC-4009-30, Руководство пользователя

Страница: 9 / 35

www.hypercable.fr - www.e-rake.us.com
9
2-3 Mechanical Description
Please refer to the following table for the meaning of each feature.
ODU: (External antenna)
Bottom Side
Outdoor Multi-function Radio Figure
Note:
1. RF1-Primary port connect to V. polarization of the MIMO antenna. Or -45° slant or RHCP
2. RF1-Secondary port connect to H. Polarization of the MIMO antenna. Or +45° slant or LHCP
Note: screw the cap back well after you use the reset button or beeper.
This equipment must be grounded. Never defeat the ground conductor or operate the
equipment in the absence of a suitably installed ground conductor. Contact the
appropriate electrical inspection authority or an electrician if you are uncertain that
suitable grounding is available.
1
RJ-45 Port
Use the SFTP cat.5 cable with weatherproof connector to connect to the “To ODU” side of
the POE injector.
2
N- Jack Antenna
Connector
Here you can attach the N-type external antenna to the 300 MHz 4x4 MIMO HT-OFDM
MESH Radio. In order to improve the RF signal radiation of your antenna, proper antenna
installation is necessary.
3
Grounding stud Connect to the ground conductor with the ground wire.
4
Reset button
Revolve the plastic cap, you will see the reset button. Press it and hold for 5~10 seconds,
the radio will back to factory default settings.
5
RSSI LED
Indicator
Indicate the link status info of the Wireless modules, please refer to segment 2-5 for the
LED indicating rules.
6
Membrane Vent
1. Moisture vapor permeable to help aid in condensation and fogging reduction in the
ODU.
2. High airflow allows pressure equalization to prevent stress on enclosure seals
RJ-45 Port
RSSI LED Indicator
& Reset button
RF1- Primary RF1- Secondary
Grounding stud Membrane Vent Grounding stud