Hyper Scotty Cranmer SC1, Руководство пользователя, Страница: 20 / 47

P
A
G
E
18
SADDLE HEIGHT
(FIG A)
FORWARDS AND BACKWARDS
(FIG B)
FORWARDS AND BACKWARDS
(FIG B)
1.
1. 1.
NOTE:
NOTE:
Seat post must be inserted at least to the minimum
insertion mark stamped on the lower part of the post. If
no minimum insertion mark can be found, make sure at
least 3” of the post is inside the bicycle frame tube.
Turn crank to place it in it’s lowest position.
Position crank arm parallel to the ground. Position crank arm parallel to the ground.
2.
2. 2.
3.
3.
4.
4.
Place heel of foot on pedal with foot parallel to the ground.
Place ball of foot on pedal with foot parallel to the ground. Place ball of foot on pedal with foot parallel to the ground.
Position saddle so that toe of other foot can touch the ground.
Saddle should also be parallel to the ground and aligned
straight with the bicycle frame.
Position the saddle so that an imaginary line drawn from the
center of your knee to the pedal spindle is vertical. Some
riders move the saddle slightly forward of this position.
Tighten seat post bolt. Recommended torque is 150 in/lbs.
Tighten saddle clamp nuts securely.
Please read and follow all directions in this manual.
Always wear a helmet when you ride.
Saddle should be horizontal and perfectly aligned with
the bicycle.
FIG A
FIG B
A
D
JU
S
T
M
E
N
T
BICYCLE
ASSEMBLY