HYPER TOY COMPANY DRIFT YAMAHA YXZ 1000R, Быстрый старт

Страница: 2 / 6

Batteries and Charging Installation
1
OFF ON
Batteries
Vehicle
Remote Controller
Battery loading:
NOTICE:
Charging the
Vehicle battery:
Remote Controller
2 x 2.5V AA Batteries
(Not included)
3.7V 180mAh rechargeable battery
(included in the vehicle)
Vehicle
3.7V 180mAh
The remore control unit is equipped with two 1.5V AA
non-rechargeable batteries (Battery need additional
purchase).
When the product is idle, please push its power switch to “OFF”, and take out the batteries in
case the service life of the rechargeable batteries is affected.
1) Push to slide out the battery cover.
2) Load the new 1.5V AA batteries corresponding the “+”
and “-” in the battery case to the “+” and “-” of the batteries.
3) Slide the battery cover back to the remote controller.
1) insert the USB (1) to any
power souce which has USB
interface, such as computer. The
red light will turn on when it detected
power. After that plug the charging end
to the charging port which located under the
vehicle (2). Make sure the vehicle is turned OFF.
The light on the USB will turn off when it is fully
charged.
Overcharging may damage the batteries, cause burnings
or catch a fire.
OPEN