Hyper Tough ABW-HP-1600, Руководство оператора, Страница: 5 / 20

When using this product, basic precaution should always be followed, including the following ones.
„
To reduce the risk of injury, close super vsion is necessary when a product is used near children.
„
Be thoroughly familiar with controls. Know how to stop the product and release pressure quickly.
„
Stay alert and watch what you are doing.
„
Do not operate the product when fatigued or under the influence of alcohol, drugs or any medication.
„
Keep operation area clear of all persons and pets.
„
Do not overreach or stand on unstable supports. Keep good footing and balance at all times.
„
Follow the maintenance instructions specified in the manual.
„
People with electronic devices, such as pacemakers, should consult their physician(s) before using
this product. Operation of electrical equipment in close proximity to a heart pacemaker could cause
interference or failure of the pacemaker.
:
Drilling, sawing, sanding, blasting, grinding, or machining wood products or
masonry products and other construction activities can expose you to wood dust or masonry particles
including formaldehyde and lead, substances known to the State of California to cause cancer, and
birth defects or other reproductive harm. Avoid inhaling wood dust or masonry dust or use a dust mask
or other safeguards for personal protection. This product can expose you to chemicals including lead
and phthalates which are known to the State of California to cause cancer, and birth defects or other
reproductive harm. Wash hands after handling. For more information go to www.P65Warnings.ca.gov-
/wood.
READ ALL INSTRUCTIONS BEFORE USING THIS PRODUCT
„
This Product is provided with a ground fault circuit interrupter(GFCI) built into the power cord plug. If
replacement of the plug or cord is needed, use only identical replacement parts that include GFCI
protection.
„
If product is provided with a GFCI, be sure to inspect cord and GFCI prior to use. Any repair or
replacement of the power cord must be performed by a qualified (licensed or certified) electric techni-
cian.
„
In a double-insulated product, two Systems of insulation are provided instead of grounding. No
grounding means are provided for a double-insulated product, nor should grounding means be added
to the product. Servicing a double-insulated product requires extreme care and knowledge of the
system, and should be done only by qualified service personnel. Replacement parts for a double-insu-
lated product must be identical to the original parts. A double-insulated product is marked with the
words “Double Insulation "or “Double Insulated.” The symbol may also be marked on the product.
„
Risk of injection or injury-Do not direct discharge stream at people or animals.