P
U
S
H
I G
N
IT
IO
N
PUSH
P
U
S
H
I G
N
IT
IO
N
ON
OFF
KEY
LOCK
7
④
TURN SIGNAL INDICATOR LIGHT
When turn signals are being operated. the indicator
will flash intermitently.
⑤
OIL INDICATOR LIGHT
When the engine oil level in the tank becomes too
low requiring
“
HYPOL OIL
”
refilling. the indicator
will light. When the oil level check light turns on, the
3. CONTROLS
①
SPEEDOMETER
The speedometer indicates the road speed in
kilometers per hour.
②
ODOMETER
The odometer registers the total distance that the
motorcycle has been ridden.
③
FUEL GAUGE
It indicates the remaining fuel amount in the fuel tank.
E indicates the fuel tank is empty or nearly so. (the
remaining fuel is 1.3
ℓ
at E. the capacity is 4.8
ℓ
)
Fill the fuel tank before E.
①
IGNITION SWITCH
The ignition switch has three positions:
INSTRUMENT PANEL
SWITCH
◉
(ON)POSITION
The ignition circuit is completed and the engine can
now be started. The key cannot be removed from
the ignition switch in this position.
◉
(OFF) POSITION
All electrical circuits are cut off.
◉
(LOCK) POSITION
To lock the steering, turn the handlebar all the way
to the left. Push down and turn key to the
(
LOCK
)
position and remove the key. All electrical circuits
are disconnected.
The fuel gauge indicates the remaining
amount whenever the ignition switch is
(
ON
)
or
(
OFF
)
. For checking the remain-
ing amount of fuel, put the motorcycles
on the center-stand and set the ignition
switch is
(
ON
)
.
CAUTION
The lack of Engine oil could cause serious
damages on the Engine.
CAUTION
remaining amount of oil has become approximately
0.23
ℓ
.
