HYOSUNG Rally, Руководство пользователя

Страница: 48 / 59

47
Before and during the cleaning opera-
tion, inspect the element for tears.
A torn element must be replaced.
Be sure position the element snugly and
correctly, so that no incoming air will
bypass it.
Remember, rapid wear of piston rings
and cylinder bore is often caused by a
defective or poorly fitted element.
CAUTION
● ●
Don
’
t use the cleaning solvent
whose flash point is low when clean-
ing the element.
● ●
Assemble the element completely or
damage severely the engine.
● ●
Be careful not to allow water to go
inside the air cleaner element.
CAUTION
● ● Do not remove absolutely airtight
cover as airtight type battery.
● ● Keep after separate at the motorcycle
for the minimum of self electric dis-
charge and electric leakage when
don
’
t use for a long time.
Remove the ( ) negative terminal
when keep intact at the motorcycle.
CAUTION
● ●
When the assembly of air cleaner ele-
ment is not completely done, dusts
can go inside and damage severely
engine.
● ●
Be careful not to allow water to go
into the element while washing.
CAUTION
More frequent servicing may be per-
formed on motorcycles that are used
under severe conditions, also clean the
air cleaner element to prevent damage
of the engine.
CAUTION
�
�
◉ ◉
INSPECTION OF BATTERY SOLU-
TION LEVEL
MF(Maintenance Free) battery of airtight
type is used for this motorcycle.
It is not necessary to inspect or supple-
ment battery fluid.
The battery is located under the pillion
seat.
However, have your dealer check the
charging condition of battery periodically.
BATTERY
*Rally(o/m)-E/060207 2006.2.7 6:44 PM 페이지47 001 PagePro 9100 300DPI 100LPI
COPYRIGHTED