HYOSUNG MONiMAX8100T Скачать руководство пользователя страница 5

Страница: 5 / 110

Operator Manual Chapter1. Preface

Hyosung TNS Inc.

1-1

Chapter1. Preface

Purpose

► This manual is produced to describe how the customers operate Hyosung TNS

MX8100T.

This manual details how the customers replenish the notes and paper and how they
remove the jam at the MX8100T.

Audience

► Customers and staffs of Hyosung TNS who use and operate the MX8100T in each

branches of bank.

Support Information

► If any question or error occurs while operating MX8100T in compliance with this

manual, please contact maintenance staffs of Hyosung TNS.
For the contact of maintenance staffs of Hyosung TNS, see the E-mail addresses and
telephone numbers provided separately.

What is in This Manual

► MONiMAX referred to as “MX”

► This manual is designed to provide the operation guide for the MX8100T and the

detailed description of the following:

▪ Replenishing the notes and the receipt paper

▪ Emptying the notes

▪ Removing the jam like the notes and the receipt paper

► All information described in this manual is a licensed product of Hyosung TNS.

Some of the information in this manual may differ according to the network processor
to

be connected and may be subsequently updated by the bank’s needs or the

improvement by Hyosung TNS.

It is the policy of Hyosung TNS to improve products as new technology, components,

software, and firmware become available. Therefore Hyosung TNS reserves the right
to change specifications without notice.

Содержание MONiMAX8100T





































































































Результаты поиска

Содержание MONiMAX8100T

Отзывы:

Бренды по названию

Популярные бренды

HYOSUNG MONiMAX8100T, Руководство оператора

Результаты поиска

Содержание MONiMAX8100T

Отзывы:

Бренды по названию

Популярные бренды