background image

1

The personal safety of the rider may be 
involved. Disregarding this information 
could result in injury to the rider.

WARNING

These instructions point out special
s e r v i c e   p r o c e d u r e s   o r   p r e c a u t i o n s
that must be followed to avoid damag-
i n g   t h e   m a c h i n e .

CAUTION

NOTE: This provides special information 

to make maintenance easier or impor-
tant instructions clearer.

IMPORTANT

BREAK-IN INFORMATION FOR 
YOUR MOTORCYCLE

The first 1,000km(600miles) are the most impor-
tant in the life of your motorcycle . 
Proper break-in operation during this time will 
help ensure maximum life and performance from
your new motorcycle.

Hyosung

parts are manufactured of high quality

materials, and manufactured parts are finished to 
close tolerances. Proper break-in operation
allows the machined surfaces to polish each
other and mate smoothly.

Motorcycle reliability and performance depend
on special care and restraint exercise during
the break-in period. It is especially important that 
you avoid operating the engine in a manner
which could expose the engine parts to exces-
sive heat.

Please refer to the BREAK-IN section for specific
break-in recommendations.

WARNING/CAUTION/NOTE

Please read this manual and follow its instruc-
tions carefully. To emphasize special informa-
tion the words  WARNING ,  CAUTION and 

NOTE carry special meanings and should 

be carefully reviewed.

ProCarManuals.com

Содержание Exceed 125 2002


































Отзывы: