NOTE: When charging with a completely empty battery (when the LED cannot be turned
on), the device will take longer to charge. Charge-in efficiency will dramatically
increase with at least 20% residual capacity stored in HYmini’s internal battery. In
other words, it is not recommended to solely rely on the wind generator to fully
charge HYmini when its internal battery is completely emptied.
C. USING miniSOLAR PANEL (sold separately)
1.Connect the
HYmini
wind
unit
to
the
miniSOLAR
panel
through
DC
input jack, and place
the solar panel in a position where it can absorb radiation.
2.The side indicator turns red when enough sun or light power is converted into
electrical current and stored in the device’s internal battery. The indicator on the side
turns green when HYmini’s internal battery completes charging. The built-in safety
control circuit protects HYmini from being overcharged.
3.To link two or more solar batteries together, you can connect multiple panels by linking
the female DC jacks one.
NOTE: Power converted by multiple miniSOLAR panel is cumulative, therefore, the
more panels you have the more power is stored. The efficiency is greatly increased
with
full
direct sun.
Solar
panels
are
to
be
purchased
separately
at
additional cost.
NOTE: You can increase capacity by linking up to 4 panels.