PLEASE READ THESE INSTRUCTIONS CAREFULLY BEFORE ATTEMPTING TO INSTALL AND OPERATE THIS HEATER
IMPORTANT SAFETY INSTRUCTIONS
WHILST MEETING THE REQUIREMENTS OF BS:EN90335-2-30, THE SURFACE OF THIS TUBULAR HEATER CAN STILL
GET HOT. IT IS THEREFORE RECOMMENDED THAT THE AGED, INFIRM, CHILDREN AND ANIMALS ARE NOT LEFT
UNSUPERVISED IN THE VICINITY OF THE HEATER UNLESS A SUITABLE GUARD IS FITTED.
DUE TO THE HIGH SURFACE TEMPERATURES, IT IS ESSENTIAL THAT COMBUSTIBLE OR FLAMMABLE OBJECTS
SUCH AS FABRICS OR CLOTHING DO NOT COME INTO CONTACT WITH THE HEATER.
IF A TUBULAR HEATER IS TO BE INSTALLED IN A PLACE USED BY THE PUBLIC A WARNING NOTE SHOULD BE
PLACED ADJACENT TO THE HEATER AVISING THAT THE SURFACE IS HOT.
ENSURE THE POWER CORD IS PUSHED FULLY INTO THE POWER SOCKET IN THE HEATER WHEN IN OPERATION.
IF THE CORD IS DAMAGED DISCONTINUE USING THE PRODUCT AND CONTACT THE MANUFACTURER FOR
FURTHER INSTRUCTIONS.
ALWAYS SWITCH THE HEATER OFF AT THE MAINS WHEN NOT IN USE AND ENSURE THE POWER CORD IS NOT IN
CONTACT WITH THE SURFACE OF THE HEATER.
THE HEATER MUST ALWAYS BE POSITIONED HORIZONTALLY USING THE MOUNTING BRACKETS SUPPLIED AND
ALLOWING FREE MOVEMENT OF AIR AROUND THE HEATER. DO NOT COVER THE HEATER AS THIS MAY CAUSE
OVERHEATING.
THE HEATER IS WATER RESISTANT (IP44 RATED) AND IS SUITABLE FOR USE IN LOFTS, GARAGES, UTILITY ROOMS,
AIRING CUPBOARDS, SHEDS, DISPLAY WINDOWS ETC. HOWEVER IT IS NOT WATERPROOF AND SHOULD NOT BE
USED IN ENVIRONMENTS WHERE CONTINUOUS OR EXCESSIVE WATER-SPRAYING MAY OCCUR.
DO NOT USE THE HEATER IN BATHROOMS, SHOWERS OR SWIMMING POOLS.
WHEN USING THE HEATER IN AN AREA WHERE IT MAY COME INTO CONTACT WITH WATER,
AND TO ENSURE IT’S IP44 RATING IS MAINTAINED - ALWAYS ENSURE THAT THE POWER
CABLE HAS THE BLACK FOAM GASKET IN PLACE ON THE CONNECTOR END BEFORE
PLUGGING IT INTO THE SLIMLINE HEATER [FIG.1]
IMPORTANT SAFETY ADVICE
1. INSTALLING THE SLIMLINE ECOHEATER
IMPORTANT: The heater should only be operated in the
horizontal plane, using the mounting brackets provided.
•
Dimensions of the heaters are shown in [Fig.2].
Wattage A
55
500mm
90
750mm
120
1000mm
190
1500mm
• Before installing the heater it is recommended that
the power cable is attached by pushing it fully into the
heaters power cable socket [Fig.3].
Assembly & Fitting Instructions
Fig.1
70mm
95mm
A
Fig.2
Fig.3
English
