1.
3.
2.
DEEP CLEANING OF CARPETED FLOORS
with the HYLA Electro Nozzle
Deep Cleaning of Carpeted Floors
31
30
Electro Nozzle Set
VENTUS ELECTRO NOZZLE SET
1. Electro Nozzle
2. Electro Flexible Hose
with remote control unit
3. Telescopic Tube
Please always turn off the main switch of the HYLA System before connecting
or disconnecting the Electro Nozzle. The Electro Nozzle power cord should
be connected to the flexible electro hose outlet on the handle, and the
electro flexible hose is then connected to the motor unit. The main switch
will turn on the Electro Nozzle. To activate the Electro Nozzle, release from
its parking upright locked position by pressing the button located to the left of
the swivel neck. You will notice a green light indicating operation. You can also use the remote
control
unit to switch on/off the Electro Nozzle and the HYLA.
Maintenance:
•
Disconnect power from the Electro Nozzle.
•
Textile fibers can be removed from the brush by cutting them and vacuuming.
WARNING:
Never
use the Electro Nozzle outdoors or on wet surfaces. If the Electro Nozzle is overloaded,
the built-in protection turns off the Nozzle and the red light indicator warning may come on. In
this case do not touch the brush roller. Disconnect the power from the Electro Nozzle and clear
any objects blocking the roller. The Electro Nozzle will operate when re-powered. Make sure body
parts and any loose clothing are well clear of rotating parts.
